• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by umar

  1. U

    CAT Telehandler Steering stutter/popping

    Can i have the real serial number
  2. U

    Cat TH514 - Hydraulic Problem

    For this you would need For this you would need to calibrate the joystick using the diagnosis tool
  3. U

    Cat TH514 - Hydraulic Problem

    Have you checked the inlet pressures and load sensing pressures? Have you also tried to balance the margin pressure on the piston pump? You would need guidance to do that, however from your explanation seems the pump is working with so much resistance as a result of a low pressure, let me know...
  4. U

    TH 460 Telehandler not starting

    I have this TH460B (SLF00539) which had Piston pump issue and have been kept down for close to a year now, recently replaced a new pump and it wont start by while cranking, initially it was cranking slowly then i realized the Steering mode switch seems to have been tampered with as it shows a...
  5. U

    140h grader no voltage on the transmission solenoids

    I have done all this and all was working perfectly well as at the time, yet the machine was returned back to the workshop that all gears not engaging, I tried cleaning the spools again by opening the valves from the back and replacing them one after the other while testing again, at the time I...
  6. U

    140h grader no voltage on the transmission solenoids

    The gears were actually not responsive before so we changed the solenoids for all the gears and they were now responding on the coil body it was indicated that it was a 24V solenoid I also used a direct battery to actuate it but on installation on machine the voltage read 4.6V for all the 5...
  7. U

    140h grader no voltage on the transmission solenoids

    No, all gears currently working
  8. U

    140h grader no voltage on the transmission solenoids

    Hi anyone still here? I am having same issue as above but my 140H grader solenoid valve gives 4.6 Volts yet working normal, but I thought it was suppose to deliver 24Volts when tested with a multi meter? Pls someone help
See more
Top