• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by superdutyII

  1. S

    case 621b

    The problem with mine ended up being a broke wire at the connector. the best way to explain it is while you are standing on the right side of the machine in front of rear tire there was a 4 wire connector that screwed in on the top of transmission one of those wires had pulled out.
  2. S

    case 621b

    I am just getting back to work on my loader. It still will not move I have replaced trans computer, and took every ground wire off and cleaned contacts and inspected them. I went back and retested solenoids and the second from top would not ohm out I mean nothing the rest of them where from 95...
  3. S

    case 621b

    all solenoids checked out and i will check grounds again.
  4. S

    case 621b

    the trans module is clicking 3 times i have checked all grounds and i dont see any problems. any ideas where to go from here
  5. S

    case 621b

    621b I have power to trans computer but I don't have any coming out. I ordered new trans computer waiting on it to come in
  6. S

    John deere 444c

    My loader has steering problem all fluids are good but it will not turn i was useing it earlier and turn slightly to the left and it kept on turning to the left. I back up and went foward several times and it finally straightened up. I went on to the shop checked all fluids and cranked it back...
  7. S

    case 621b

    I screwed the plug loose at the solenoids and checked for fire to the plug and I dont have any fire. what supplies fire to the solenoids
  8. S

    case 621b

    the back up alarm does work in reverse can you tell me how to check the solenoid
  9. S

    case 621b

    what supplies fire to selonoid pack and if its a relay where would it be located
  10. S

    case 621b

    the light is not on and its free wheeling acts like its in neatral. if i apply hand brake and put it in gear the buzzer goes off letting you know the hand brake is on.
  11. S

    case 621b

    I have a case 621b the problem is that the trans. has stopped working the loader pulls fine then it stops just like you put it neutral or pull emegency brake. I checked fluid and checked hand brake switch. Sometimes you can turn it off and crank it back up and it will start working again. I dont...
  12. S

    Help With JD 544B Transmission

    i have a john deere 444c and it did about the same thing and it was the pump but yea you need to check pressure and see where you are at.
  13. S

    Loader Tire Repair Remove Install Tips Please

    the easy way for me is to use my spare loader to break the bead but the slide hammer seems to work just as well.
  14. S

    Loader Tire Repair Remove Install Tips Please

    tires I have the best way is to take the wheel off the tractor we use a slide wedge and it works well I use a small forklift to do all the lifting and putting it back on the tractor. Hope this helps
See more
Top