• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by S.Fox

  1. S

    CATT 299D XHP No Hydraulics

  2. S

    CATT 299D XHP No Hydraulics

    the T handle is in the down or pushes in position
  3. S

    CATT 299D XHP No Hydraulics

    Would have to get the tooling from the mechanic. I do have a question these test require you to disengage the parking brake but the fan runs on hydraulics without the brake disengage. So if there is no fan running and no fluid coming to the hydraulic filter is this test necessary?
  4. S

    CATT 299D XHP No Hydraulics

    Not nothing works now. When it first stop moving the grapple moved slowly for just a few seconds now no movement on anything. No real evidence of a lot of metal in the filter that would suggest massive failure. I will check on the codes but I am leaning towards the gear pump. It supplies...
  5. S

    CATT 299D XHP No Hydraulics

    It just stops the hydraulics on the grapple still worked but very slow for just a few seconds long enough for me to lift and drop the log and then lowered it then would not move.
  6. S

    CATT 299D XHP No Hydraulics

    No have not really looked into a lot of electrical because of no warnings or codes that came up and everything i have read said the fan runs when you start it no matter what unless you have hydraulic issues. (Coupler) which it is not that.
  7. S

    CATT 299D XHP No Hydraulics

  8. S

    CATT 299D XHP No Hydraulics

    CAT0299DAJST01268 Give the information I can so maybe this will help other also if can figure it out. Lost all hydraulics while working. When it happened was moving some items with grapple and machine came to a stop. No movement forward or backward. For a minute I had a enough hydraulics to...
  9. S

    No power to my electric quick attach on CAT 259D

    looks like both relays are using the same ground and power so it would have to be the relay or the signal to make the coil energize.
  10. S

    No power to my electric quick attach on CAT 259D

    Thanks just now go a chance to look at the schematics, and I will look at the relays first and check them out. Hopefully if weather is not to bad be able to look at it this weekend.
  11. S

    No power to my electric quick attach on CAT 259D

  12. S

    CAT 299D XHP Alternator not charging

    Attachment actuator
  13. S

    CAT 299D XHP Alternator not charging

    Thanks ended up with another alternator and fixed the issue must have gotten a bad one the first time. Now have another issue if it not one thing it's another. My electric actuator will release only will not lock not sure where to go with this I was thinking relay but the chart on the relay...
  14. S

    No power to my electric quick attach on CAT 259D

    Could I get copy of that schematic? Mine will open/release but will not lock back. Checked voltage at the motor i of course get the voltage to open but nothing the other direction.
  15. S

    CAT 299D XHP Alternator not charging

    well i guess I will be ordering another Alternator and go from there..
See more
Top