• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Ryan 23

  1. R

    JD 410D electrical issues

    Also, every once in a while the Engine Alt Voltage light comes on , but will go off after about 5 minutes or so. I'm going to replace this relay, it dosent clunk when I turn the key to Acc....
  2. R

    JD 410D electrical issues

    I replaced the Relay and everything was working good until today when I had to turn the machine off for a few minutes to make a phone call. I shut the machine off and when I turned it back on none of the accessories were working again.... Any ideas?
  3. R

    JD 410D electrical issues

    I got the relay pulled, there was a long black wire that wasnt hooked up to anything that came off where the grounds were hooked up on the relay. any ideas to where that goes to?
  4. R

    JD 410D electrical issues

    A friend of mine checked the fuses with a test light and said they were getting power, I may have misunderstood him.... I will try to whack it a few times, if that dosent work I will just replace it.
  5. R

    JD 410D electrical issues

    I put one lead on one big terminal and one on the other, that's where I got the 12.66 volts, then when I turned the key to the Acc position it dropped to 12.61volts
  6. R

    JD 410D electrical issues

    I get voltage when I go from one big terminal to the other with the leads on my multimeter . This is a new machine to me, I've never ran it before this year.
  7. R

    JD 410D electrical issues

    it clunked at accessory, I checked for voltage drop. it went from 12.66 to 12.61.
  8. R

    JD 410D electrical issues

    this is whats in there... when I turn the key I heard it clunk.
  9. R

    JD 410D electrical issues

    ok, I got the panel out, is it round and about 2 inches long with a couple wires coming off it?
  10. R

    JD 410D electrical issues

    this is the fuse panel, I have checked all the blade fuses and they are all good. not sure how to check the black ones
  11. R

    JD 410D electrical issues

    ok, I dont see any screw terminals, I saw some black square relays, once it gets light enough and I get a break in the rain, I will go get a picture and post it if that will help.
  12. R

    JD 410D electrical issues

    shouldnt I be able to switch them to see if they work?
  13. R

    JD 410D electrical issues

    I have a JD 410D (unknown year) that is having electrical issues, I'm not getting power to a lot of places, like lights, heater, wipers, ect. I checked all the fuses and they look fine and am getting power to them. this is my first piece of equipment so any kind of help would be appreciated!!
See more
Top