• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by onehandman1

  1. O

    Case 580 Super M Series 2 dome light

    Hi Edge, That is what it looks like to me! I'll have to pop the switch out to confirm the size but 2 bucks is better than 75. Thank you!
  2. O

    Case 580 Super M Series 2 dome light

    Hi All, I'm hoping someone has sourced the black rocker switch in a cab light on a case backhoe. Mine went back, and I'm struggling to find a replacement one. I don't mind splicing the new one in(doesn't have to be plug in play) . Picture of a light for reference. I'd just prefer not to...
  3. O

    Warning light on 2005 Case 580 Super M series 2

    Hi Ryan if similiar to my 05 it is on the rear differential near where the driveshaft connects to the pinion.
  4. O

    Case 580 Super M Series 2 fuel filter replacement

    Hi Rick, Yes mine does have the Iveco engine. Its a 2005
  5. O

    Case 580 Super M Series 2 fuel filter replacement

    Hi Rick, My super M series 2 has the primer right on the lift pump on the side of the engine. Manual didn't say anything about filling the fuel filter up before install. I Personally never do, but I'm going to go with its personal preference. :)
  6. O

    Rear tire Dismount- Case 580 Super M Series 2

    Hi welder, I got the tire back on tonight. In regards to the gaps, i assume you mean the gap between the tire and rim to seat the bead. I just use ether, have to be careful but it works well.
  7. O

    Rear tire Dismount- Case 580 Super M Series 2

    Well! I just needed to man up a little, tires off and patched. Tonights job get it back on :)
  8. O

    Case 580 Super M Series 2 fuel filter replacement

    Hi Rick, according to the service manual: Drain the fuel inside the filer by operating the water release screw. Collect the fuel in a container without impurities unscrew the catridge by using acceptable tools coolect the eventual inside the filtering cartridge clean the gasket seat on the...
  9. O

    Rear tire Dismount- Case 580 Super M Series 2

    Hi Delmer, I'll have to double check tomorrow, I don't feel like going back out to the barn tonight. But I feel like both sides were pretty similar. Yes I do(i should say think) have the other side/half of the bead dropped into the center to allow the side I'm spooning toe come over top...
  10. O

    Rear tire Dismount- Case 580 Super M Series 2

    Hey Y'all, I've done quite a few tires by hand, started my first job doing tires at a tire shop(automotive) but it was in a farm town.. I've done tires ranging from skid steer tires to larger tractor tires 16.9-28 . However I am having a heck of a time getting the bead of the tire to come...
  11. O

    580 Super M series 2

    Hey Guys, Finally got around to putting the cylinder back together and getting it installed. Below is me installing the cylinder back into the tractor. If you have 20 minutes to spend, hope you enjoy
  12. O

    580 Super M series 2

    Wanted to provide an update..... Let me say, I should record myself when working on this as I believe everyone would get a laugh out of it. Having the 5075E was nice to be able to pick the cylinder out of the boom. What i found: Bolt came loose and backed off allowing the piston to come...
  13. O

    Case 580 Super M Series 3

    Brim, Totally understand. I ended up purchasing the Service Manual for my Case. One of the best investments i've made.
  14. O

    580 Super M series 2

    Billrog, That is my intial thoughts, hope to get some time set aside to look at it within a week or so. I will report back with my findings with photos as well(I always say this, but get in the middle of it and forget pictures until its complete LOL)
  15. O

    Case 580 Super M Series 3

    Not sure why I mispelled brake haha
See more
Top