• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by muller

  1. M

    Please help cat 315 slow hydraulics

    thanks <mobiltech, can you tell me where that selenoid is and what do i have to do with it thanks
  2. M

    Please help cat 315 slow hydraulics

    Thanks Bob i will check tomorrow and let you know
  3. M

    Please help cat 315 slow hydraulics

    Hello i need help i have a 1995 315 with arround 14,000 hours no major repairs on it. some times the machine is very very slow in all of its functions, but y lift the arm up and down and then it Works fine, and it Works fine all day, machine becomes slow like 2 or 3 times a day but i do the same...
  4. M

    cat 315 blue smoke after flood

    yes the machine got complitely flooded including the engine but tje machine was not running y changed oil filter air and fuel filter the oistons pistons had water between the head and the piston but I removed th3 nozzles and try to start the machine to get the water out also I add to each piston...
  5. M

    cat 315 blue smoke after flood

    315 flooded blue smoke yes the machine got complitely flooded including the engine but tje machine was not running y changed oil filter air and fuel filter the oistons pistons had water between the head and the piston but I removed th3 nozzles and try to start the machine to get the water out...
  6. M

    cat 315 blue smoke after flood

    Hello I have a cat 315 the machine was working very good with normal smoke then got flooded for a day I pull thr water out of the engine bye taking of the nozzles and drain the water I change the oil, machine starts fine but with alot of blue smoke any ideas what shoul I do I just had the engine...
  7. M

    325bl monitor and transit problem

    Hello, look i have a 325bl excavator with 6400 hours, my problem is that when i start going forward or backward, the tracks at like 5 meters they go very slow it looses power on the chains thet ill let go the pedals and it goes again quick then it happens the same. Also the monitor has just a...
  8. M

    D7h trans problem

    thanks, for the advice, look i allready checked all the suctionscreens and they were all clean, the thing is that when the oil is hot works the same as id when it is cold, also it pucshes fine the dirt.
  9. M

    D7h trans problem

    Hello, look i have a d7h and at first it shifts ok but sometimes when you start to work if you are on reverse first gear and and you go to neutral to shift to forward it wont shift you have to return to neutral and then go again to forward and it will shift i checked preassures on the trans pump...
  10. M

    aftermarket parts

    Hello, i am fixing a d8n tranny and i want to buy aftermarket parts, what brand should i buy; any advice??? i have bought american crane!!! thanks Muller
  11. M

    D8N transmission problem

    i only know the screen that goes on the bottom of the trans and the trans filter, and the one that goes on the converter am i missing one? thanks
  12. M

    D8N transmission problem

    here is a pic of what i found before disasemling the trans clutch on the forward pack.
  13. M

    D8N transmission problem

    hello jeremihaSr, and thanks for the tips, look the 1 speed and the 2nd speed look fine also the reverse the only one that burned out is the forward i will check all that you told me, the only thing is that it is a lot of cluth paste that got stock on the screen tat is on the bottom of the...
  14. M

    D8N transmission problem

    hello i need help, i pull out a transmission out because the machine didnt move forward, i replace all the forward friction discs, and reseal all the trans, a week after all the clutch discs again were worn out, the same problem happened again but with less work only 4 hours. i cleaned the...
  15. M

    D6R fire

    yes i got some pics, the thimgs is that i have no permission of the forum to post them.
See more
Top