• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by MikeSelly

  1. MikeSelly

    Hydraulic Track won’t tighten

    Haha no worries. Yea there’s no oil leak we can see and when we take the valve out there’s plenty of oil in the lines.
  2. MikeSelly

    Hydraulic Track won’t tighten

    This one is a hydraulic system with a relief valve you turn to loosen or tighten, does not use grease.
  3. MikeSelly

    Hydraulic Track won’t tighten

    This is track, hydraulic valve in the circle hole in the middle.
  4. MikeSelly

    Hydraulic Track won’t tighten

    Having issues with our t870 2018 bobcat skidsteer. We got the track back on but the track won’t tighten. The tensioner fitting is less than a year old. Any ideas?
  5. MikeSelly

    Slight bucket un-curl

    Also, when we are digging, when we curl in towards to take a scoop, it causes the cylinder to suck back in so the bucket curls back out instead of holding the curl
  6. MikeSelly

    Slight bucket un-curl

    We are testing it now, it does super slowly drop back down
  7. MikeSelly

    Slight bucket un-curl

    To answer shimmy, the bucket doesn’t continue to droop it always stops at that certain point and stays there no problem
  8. MikeSelly

    Slight bucket un-curl

    This is that little part sticking out the right side where the cylinder hose tracks back all the way to the valve housing?
  9. MikeSelly

    Slight bucket un-curl

    Thanks guys I’ll give all this a shot. We are gonna take the cylinder off our other machine just to make sure it has nothing to do with it and then back track to the area you mentioned
  10. MikeSelly

    Slight bucket un-curl

    Dealing with a 336E
  11. MikeSelly

    Slight bucket un-curl

    Trying to figure out what’s causing this. When I curl the bucket in I can get it to go all the way but as soon as I let go of the joystick the buckle un-curls back about a foot. Also curling the bucket seems slower than normal. Un-curling is completely normal and nice and quick and will hold...
    • MikeSelly
    • Thread
    • bucket curl cylinder excavator 125b
    • Replies: 14
    • Forum: Excavators
See more
Top