• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by LandonRobinson

  1. L

    shop organization ?

    Organization is going to be your best friend... Two of the biggest time and space wasters are "What ifs" and "Maybes"... at a previous job we had a shelf full of metal stuff that was individually wrapped in plastic wrap and around every four months we had to clean all of the dust and debris off...
  2. L

    Linkbelt LS-4300 - Need picture of what fuses do.

    OK, here goes... - The second fuse down on the left runs a hydraulic valve (and probably some other things), there is a trio of valves bolted on the other side of the wall from the hydraulic tank, the two on the outside were 43 and 48 ohms but one in the middle was shorted at 0.7 ohms and was...
  3. L

    Linkbelt LS-4300 - Need picture of what fuses do.

    Never mind I figured it out, machine is running again.
  4. L

    Linkbelt LS-4300 - Need picture of what fuses do.

    Hi, I am working on a Linkbelt LS-4300 C Series-II. Long story short I just need a picture of what the eight fuses in the fuse block behind the seat do, I have the schematic for this thing but the print is so bad that I can't make out what the fuses do. The longer story is that this thing ran...
  5. L

    Old Kenworth 849 tach not working.

    Well... What I ended up finding out late this afternoon was that buried back in the dark and covered in grease on top of the fuel assembly on the driver's side of the engine was the coupler for the mechanical spinner cable, and with that getting the electronic tach to work is not going to...
  6. L

    Old Kenworth 849 tach not working.

    I have looked the whole entire tranny over and there is no sending unit anywhere on it, the only hole that I could find anywhere was the water drain hole at the very bottom (which is a plain old hole with no threads at all), I did however find the speedometer drive at the very back (which the...
  7. L

    Old Kenworth 849 tach not working.

    Sorry for the delay, two log loaders in the sorting yard blew hydraulic hoses on Friday and I was offsite all weekend, yesterday involved tipping the cab forward on one of them. Anyway... here are some pictures of the dash and the tach. The tach is definitely electronic it only has wires going...
  8. L

    Old Kenworth 849 tach not working.

    Year: Unknown (est late 1960's - early 1970's). Model: 849 Make: Kenworth Engine #: 27161992 Engine: Cummins; NTC350FFCRX Tachometer: Stock; electronic. A quick backstory on this is that the engine is possibly not the original engine and has a "1987" rebuild date tag on it along with the...
See more
Top