• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Kendall R

  1. K

    Cat HM415C Mulcher issue

    Thanks
  2. K

    Cat HM415C Mulcher issue

    Could this be a sign of a clogged hydraulic filter on my skid steer not letting it flow properly? Or a worn hydraulic pump on my mulcher?
  3. K

    Cat HM415C Mulcher issue

    Have a cat 299d2 XHP and Cat HM415C drum mulcher. Machine has almost 2k hours and mulcher has probably around 1600. First problem I noticed yesterday while mulching was hydraulic temp would reach 205, which it doesn’t do normally since I have the aux roof cooler. So I’m thinking fan may be...
  4. K

    ‘17 Cat 299d2

    If I did it correctly, it was 2.6 ohms DX201868
  5. K

    ‘17 Cat 299d2

    Yeah that would make sense if both white wires are signals wires. They are hot when AC switch is on in the cab and go off when switch is off. I need to try to find where the orange wire goes to on the cab side/under the cab and see why it’s not getting power to tell the pink wire to come on...
  6. K

    ‘17 Cat 299d2

    Im not so sure that they do if I’m interpreting this schematic correctly. High chance I’m not.. pg 11 top right corner has the AC components/switches
  7. K

    ‘17 Cat 299d2

    power isn’t ever leaving the AC relay. Am I able to check resistance without Compressor having power? I guess I just need to read up on how to check out resistance. Diagnosing electric components isn’t my strong suite. Thanks for the info Serial is DX201868
  8. K

    ‘17 Cat 299d2

    Ac compressor isn’t getting power. Both white wires from the AC switch inside the cab to the AC relay are hot. I’m not sure that both are supposed to be hot like that..anyone know? I’ve swapped relays, still nothing. Fuses are fine. I’ve jumped the low and high pressure switches and it does...
  9. K

    Cat 299d AC schematic needed

    Thanks I’ll try to get my hands on one
  10. K

    Cat 299d AC schematic needed

    Thank you for the help. the serial number isn’t the same as my machine though. I’d really like to find one for my serial number series. Again thanks for the reply I appreciate it
  11. K

    Cat 299d AC schematic needed

    Does anyone have any AC wiring schematics on a 2017 299d xhp machine. Having trouble pinpointing where I’m not getting power to my relay that controls compressor and fans. CAT0299DCDX201868 Side note: owners manual shows fuse #8 to be for AC but when take the cover off, the picture on the back...
See more
Top