• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by JD410Jersey

  1. JD410Jersey

    John Deere 410 hydraulic troubles

    I found the issue it’s the steering valve ... not really sure what goes bad inside them
  2. JD410Jersey

    John Deere 410 hydraulic troubles

    So I finally figured out the issue ... I plugged the tee fitting off the hydraulic main line to the steering valve and the the rest of my hydraulics work as they should ... any recommendations on how to get to the valve easily and what needs to be done to it when I do get to it ... and thanks...
  3. JD410Jersey

    John Deere 410 hydraulic troubles

    So it’s been cold over here but I was able to work on the machine a little today and was able to pull out #36 It was not stuck ... I do have a leak on the low pressure line to oil cooling radiator... the line was rubbing on another metal line and caused a hole ... is it possible it’s sucking air ?
  4. JD410Jersey

    John Deere 410 hydraulic troubles

    Yeah it’s not coming out... is there a trick to getting it out ?or should it just come out when I pull the spring ?
  5. JD410Jersey

    John Deere 410 hydraulic troubles

    So I pulled it apart today and the springs are fine ... unable to get number 36 on the chart out ... which gasket could be an issue ?
  6. JD410Jersey

    John Deere 410 hydraulic troubles

    Yeah the spool moved no problem slid right out ....I’ll pull apart the control looks from the book the cooler bypass is also in here ... if I pull it a part I’ll see both the cooler bypass and seals ? Looks like the left side of the pic ?
  7. JD410Jersey

    John Deere 410 hydraulic troubles

    i also checked the transmission filter relief valve and The spring was fine
  8. JD410Jersey

    John Deere 410 hydraulic troubles

    So i did not adjust the clutch but I got a 300 psi gauge and it says I’m at 150 psi at the transmission....
  9. JD410Jersey

    John Deere 410 hydraulic troubles

    Ok I’ll order another gauge ... if that gauge shows 50 psi what would be my next step
  10. JD410Jersey

    John Deere 410 hydraulic troubles

    Yes When I did the filters and oil I pulled the screen out ...it was surprisingly clean ... transmission pump issue ?even though the machine seems to drive fine ?this all has nothing to do with the low out put pressure coming from hydraulic pump being 1100 psi?
  11. JD410Jersey

    John Deere 410 hydraulic troubles

  12. JD410Jersey

    John Deere 410 hydraulic troubles

    Final got a test coupling checked it at that port and it looks like 50 psi or so and the pump about 1100 psi .... and yes I changed the hydraulic and transmission filter ... also I have been looking in to infrared cameras...
  13. JD410Jersey

    John Deere 410 hydraulic troubles

    I did replace the filter ... the gauge set I have doesn’t fit the threads ... any recommendations on a gauge kit ?
  14. JD410Jersey

    John Deere 410 hydraulic troubles

    Gauge shows 0 psi there and top port 1100psi
  15. JD410Jersey

    John Deere 410 hydraulic troubles

    Yes Common oil supply for hydraulics breaks and transmission
See more
Top