• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by ermineerwhatbuc

  1. ermineerwhatbuc

    bobcat t190 needs heat to start

    t-190 Check the glow plug relay under your feet, Does the number countdown on the dash? The relay in my 773g works its way loose and the glow plugs don't work.
  2. ermineerwhatbuc

    Ripper

    I always thought if I found a reasonably cheap set, I'd get them and attatch 3pt hitch knuckles on it and could use 3pt attachments the way they were designed. any thing pto powered could be ran with a hydraulic motor from the front aux lines.
  3. ermineerwhatbuc

    Ripper

    yes a 943 sorrry bout that, right brand though. I would think with a full bucket upfront a 10,000 lb machine would break up hard pack soils:beatsme. maybe with a track under carriage? anyone got a 943 with rippers and a t320?
  4. ermineerwhatbuc

    Ripper

    Bobcat had a rear ripper for there 963's Awhile back, Probably a fellar could convert it to fit as most bobcats are setup for rear stabilizers, and could use the same holes plus hydraulics.:beatsme
  5. ermineerwhatbuc

    Other skid steers with pilot controls?

    so your looking at the 226b, 236band the 246c for radius lift, 232b and 242b for vertical lift, and the 247b for the tracked skidloaders. I would Advise a wheeled unit with ott tracks, run tracks in the summer and chains or just wheels in the winter for plowing or what have you.
  6. ermineerwhatbuc

    Other skid steers with pilot controls?

    alright now you have a brand and a dealer. Now you have to decide how big to go, tracks, tires, ott tracks, radius or vertical lift, cab or no cab, ac no ac
  7. ermineerwhatbuc

    Other skid steers with pilot controls?

    I don't thinks she neccasarily looking for pilot controls, just a skidsteer or compact trackloader with an all hands control system wether it be electric or hydraulic, all cats are hand controlled as well as takeuchi, and are options on newer deeres, new hollands, bobcat, and other possibly. If...
  8. ermineerwhatbuc

    looking for long reach

    last I went by tracey equipment they had a linkbelt long reach there, might want check that out[/I]
  9. ermineerwhatbuc

    bobcat 773

    code 03/ 04- battery voltage error I check all grounds, battery terminals, as well as the battery itself, how old is the battery?
  10. ermineerwhatbuc

    Snow Plowing

    I was wondering what would be a decent cost average for a winter plowing job, the road I'm to plow is 8/10's of a mile pretty straight only one hill to worry about, I plow on average every 4" or so, I been burnt in the past and want to give an upfront price before My cutting edge hits the ground...
  11. ermineerwhatbuc

    Your Lowboy Pictures Wanted

    don't know if this really counts but it's the biggest I got right now
  12. ermineerwhatbuc

    Power Bob-tach

    what happens? sometimes my power bobtach get out of alignment, all I do is hold the lever and kick it all the the way open and she works alright from there, try that if she doesn't quite release, if she doesn't lock up probably needs grease in the side grease zerks, or pour some used motor oil...
  13. ermineerwhatbuc

    need some help with a 773g series

    yeah I went all the way and backed it off so is wasn't bottoming out, at least thats what the manual said. Is that a mechanics secret?:beatsme:drinkup:usa
  14. ermineerwhatbuc

    need some help with a 773g series

    thanks guys Thanks guys, i put a bungie chord on the fan tensioner to hold er tight and er was real quiet today, I'll have to find a tensioner assembly to keep er quiet. I don't really understand reversing the machine went quiet, but I'm not mechanic so:beatsme:drinkup:usa
  15. ermineerwhatbuc

    need some help with a 773g series

    yeah I tightened it and released it until the tightener was in the 3 oclock position like the manual said. I just don't want it be some in the hydraulics loaded up and causing internal damage, and that's why she's squawking.:beatsme
See more
Top