• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Eric Sanderson

  1. E

    Volvo no start

    Not in front of me. I do know its a model 263.But I've gone thru that schematic and none of the wire coding matches. I also still haven't found any sign of an IECU. According to Chadwick-Baross, even they can't find anything that goes that far back
  2. E

    Volvo no start

    That was the only schematic Chadwick-Baross could come up with and it doesn't match. This unit pre-dates the models with an ECU. Thank you though. The effort is appreciated.
  3. E

    Volvo no start

    I have power on all terminals including crank signal. Have since I started. That was the first thing I thought of. Had that fail on the EC35.
  4. E

    Volvo no start

    I did call. Used to be WoodCo. The closest he could give me was a diagram for a EC20-C. Completely different. That model uses an ECM (or IECM). The wiring is completely different including wiring numbers. I have a service manual, but the schematics in that are basic at best. No complete wiring...
  5. E

    Volvo no start

    Having an issue with a Volvo EC20XT prominent no start. Had originally thought it was a controller issue. But replaced the controller and control timer and the problem still exists. What ever the issue is, its locking out both the starter signal and the fuel cutoff. I can bypass the start...
  6. E

    Doosan air compressor

    Found a diagram. Resistors all check good. No corrosion, no off meter readings. 5vdc where indicated. No values that I can find for what the sensor return should be though
  7. E

    Doosan air compressor

    The only thing that has been replaced has been the pressure transducer. 5 times. Even Doosan Portable Power says its the sensor. They claim to have had a bad batch of sensors and have since switched manufacturers and solved the problem. But I can't find any service companies that even know of...
  8. E

    Doosan air compressor

    Not sure if this is the right place to post this, but here goes. Have a Doosan P185WDO compressor that nobody can seem to fix. Keeps throwing CPR code 54 for an air pressure regulator issue. Both right after start up and even before the engine runs. Most of the time, never gets past the initial...
See more
Top