• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Eddie Strobel

  1. E

    Deere 200clc travel speed stuck in high

    I thought I posted an update but I believe, in the end, a new controller behind the seat was required. I know it was a head scratcher and eventually involved a Deere mechanic to struggle through it. I think he tried a spare controller before ordering one, or something.
  2. E

    Genie 5519 Joystick Pattern Change?

    I have not found, or looked into it further. Your reply is interesting. I think I will call Genie and look into it.
  3. E

    Genie 5519 Joystick Pattern Change?

    Just purchased a 2015 Genie 5519. I am not in love with the boom joystick controller. Compared to our other similar lifting equipment, it seems awkward. I would prefer the lift to be forward/back (it is) and the tilt to be left/right (it currently is boom in/out). For the boom in/out, ideally it...
  4. E

    Deere 200clc no throttle!

    Going by memory, a new computer behind the seat was put in to fix either the throttle or the high/low two speed...don't recall. Either way, the end solution was that the new computer was at fault and another was installed and made everything good again!
  5. E

    Deere 200clc travel speed stuck in high

    Thanks all. Have a Deere tech coming eventually to look things over again. I haven't been able to find a reason why the controller won't ground the two speed to engage it.
  6. E

    Deere 200clc travel speed stuck in high

    So I tracked it down but don't have it apart or fixed yet. It appears the lack of continuity for the pump pressure sensor is occurring at the chassis harness to cab harness connection. This large square connector is behind the seat by the boom side of the cab, and not real fun to access. I am...
  7. E

    Deere 200clc travel speed stuck in high

    Thank you for the quick update. Here is more info from my diagnostics 2 hours ago. I found what I thought was the pump 1 and 2 sensors and verified by unplugging them and pump 2 data disappeared on dash monitor. I swapped the wires from each sensor and "pump 2" on dash still registered and pump...
  8. E

    Deere 200clc travel speed stuck in high

    Ohh, not totally sure what you mean by this... Unfortunately you need MPDr or DrZx to see the propel pilot pressure or the speed switch status. The small "c" would get you a calculated propel pressure from the speed solenoid. If you see that reading change... I do see a large C in diagnostics...
  9. E

    Deere 200clc travel speed stuck in high

    Update. Went into diagnostics with engine running. I thought everything checked out except.... In display 2, I am not seeing any change of pump 1 delivery pressure. Regardless of what I operate, it remains at 0.0 . Hopefully that is the fix for two speed and possible feeling of reduced...
  10. E

    Deere 200clc travel speed stuck in high

    Update...I was wrong...after the tech replaced the PVC, which fixed the inoperable throttle, it is now stuck in low speed. With engine running, at the SI solenoid between cab and hydraulic tank, I have 24+ volts at the rear wire going into the SI solenoid. The front wire I presume is ground...
  11. E

    Deere 200clc travel speed stuck in high

    Skyking, I totally get that. But I don't find this forum as convenient as email, text, etc... Also, I would certainly update here with the solution if found. For the sake of the community, I will keep communicating via this forum. Thanks
  12. E

    Deere 200clc travel speed stuck in high

    MG, not sure if you saw, but I emailed you some more specifics, thinking it might be an easier way for both to communicate.
  13. E

    Deere 200clc travel speed stuck in high

    Machine has been only working in high for a few years. Occasionally it would go to slow mode but only 1%of time. Has a tech out to work on engine throttle and fixed it with new PVC behind seat. He studied two speed and claims it has hydraulic and electric issue. Unplugged the three solenoids...
  14. E

    Deere 200clc no throttle!

    This machine is also very often stuck in the high speed travel mode. I don't think I mentioned that to you, but what do you think that is about? I have heard it is fairly common. I asked them to look into that while on site as well.
  15. E

    Deere 200clc no throttle!

    Tech came down yesterday and is thinking the PVC is faulty. They are going to replace and try again.
See more
Top