• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by alyx

  1. A

    Screw type compressor problem

    still no sign of a check valve fellas. forgive my ignorance on the subject but is the recirculating valve responsible for the opening and closing of the unloader valve? is this oil through the intake perhaps caused by the unloader valve not being signaled to open and close properly?
  2. A

    Screw type compressor problem

    That’s the discharge from compressor to tank. I don’t see a check valve anywhere
  3. A

    Screw type compressor problem

  4. A

    Screw type compressor problem

  5. A

    Screw type compressor problem

    As requested im posting the model # D375Q8AY and Serial # 71553A. I have everything apart now and I am about to post pics of my findings. Thanks to everyone who has posted thier advice. I appreciate it.
  6. A

    Screw type compressor problem

    i have the discharge line off currently. i am able to clearly see the inside of compressor. thats a big negative on the check valve. i do have a seperate question. what is the function of the recirculation valve?
  7. A

    Screw type compressor problem

    Hello! Sorry for the delayed response. I’ve been overwhelmed at the shop and the compressor was deemed not a priority. Thank you for the information. I’m about to tear into this now. I will certainly be looking into the check valve before anything else. I will be sure to post my findings. Thank...
  8. A

    Screw type compressor problem

    It does have a superstore yes. I just can’t wrap my head around how it gets enough librication to pass through the inlet and out the intake.
  9. A

    Screw type compressor problem

    So I found myself in a little over my head with this one. I’ve got a Sullivan palatek screw type compressor. One day while it was running it decided to puke out a bunch of atf through compressor intake. I’m not familiar with this piece of equipment at all. Does anyone have any idea what would...
  10. A

    genie z 60/34 code 54

    I was hoping maybe someone on here had encountered a code 54 drive brake valve on a z 60/34 and perhaps has some insight on how to diag this particular problem. thanks in advance!
  11. A

    Genie z60/34 won't drive

    Actually it turned out the harness from the ground control panel to the edc had just a little bit too much resistance. I replaced it on boom on my way! Thanks every one that replied and especially to OFF for taking the extra time to help me deal with it.
  12. A

    Genie z60/34 won't drive

    Just to be absolutely certain this is what I'm testing resistance across yes? If so I've got 18 ohms
  13. A

    Genie z60/34 won't drive

  14. A

    Genie z60/34 won't drive

    Well fellas no luck with the coil swap
  15. A

    Genie z60/34 won't drive

    Will do. Thanks!
See more
Top