I've gotten the chian access ports all nice and clean, and have gotten new gaskets. Any tips on installing these to help prevent water from getting into the chain tanks? I was wondering if coating the gaskets with some thick high temp grease may help seal them. I don't really want to use something like gasket sealer or silicone, because I am going to need to remove them to flush the tanks a few times. Water got in the tanks and emulsified with the oil. I am working on flushing out all the contaminated oil. At $22 a piece plus shipping and tax, I would really like to be able to reuse these gaskets after removing the tank access caps.