rancher2
Well-Known Member
Any one made a engine removal tool brackets for removing V3800 Kubota engines. Bobcat wants about $2,100 for the three part numbers that make up their engine removal tools. Pictures would be great.
hey slowstep think i could get you to email me that picture of the engine pickerI got a removal tool pic I can email to you . looks simple to construct used to pull engine hydro pump at same time. need a welder to put together. can pull bobcat 2203 kubota but will prob work on t 180 190 250 and prob 300. send me email add and will email to you.
Any one made a engine removal tool brackets for removing V3800 Kubota engines. Bobcat wants about $2,100 for the three part numbers that make up their engine removal tools. Pictures would be great.
I got a removal tool pic I can email to you . looks simple to construct used to pull engine hydro pump at same time. need a welder to put together. can pull bobcat 2203 kubota but will prob work on t 180 190 250 and prob 300. send me email add and will email to you.
New here and great site for info! I recently removed the engine (V3307) Bobcat S650 that was rebuilt and now ready to be installed. Does the pump need to be bolted to the engine and go in as one. Also is there some sort of engine removal/install tool or bracket that would make things easier. If anyone could explain the process I have to got through or point me in the right direction be much appreciated.
Thanks in advance.