Hough Dresser TD7 w/ 6 way Blade

[ayrhead]

Hello to Everyone: I am trying to locate a Service Manual for our newly acquired dozer. I think it is the C Series as it has an International 4 Cylinder Diesel Engine in it. I'm trying to find one that has already been put into Adobe *.pdf format and hopefully for free. If not, then if someone has the manual, I am willing to borrow it and scan it into the computer so that it will be put into Adobe *.pdf format. That way anyone with a TD7 will be able to get one for Free.
Looking forward to any responses.....Harry

 

[jakesdad]

You try manualsplus.com it is company that specialize in manuals. I think they are out of Finksburg ,MD. Good Luck!

 

[ayrhead]

Thanks for the info. Right now we are trying to find out the capacities chart so that we know what type of oils and fluids the machine takes as well as how much of each fluid. I've been doing some searching but have not found out the information thus far. The Ser.# is 4410016U004157
Harry

 

[ayrhead]

I've located the manuals

Hi Everyone:
Ordered the manuals through binderbooks.com. Should be recieving them in 10 days. I will probably be transferring them over to *.pdf format. It will take me about 2 weeks to do. If anyone out there needs a manual for the TD7-E let me know and I will try to get you a copy.
Harry

 

[bhsmedley]

Been looking for a maual for a TD7G. Did you happen to noitice a manual for that in your search?
Thanks

 

[rwatkins]

If you want to keep me in mind, we got a td7e but no manual. Thanks rob

 

[ayrhead]

td7g

I think if you try www.binderbooks.com and give them a call they will have the manual that you are looking for.
Harry

 

[ayrhead]

Hi Everyone: I finally have the manual done in *.pdf format. Anyone lokking for a copy let me know and I'll send you a copy.
Harry

 

[Tarpley]

Hi Harry,
Could I please get a copy? My e-mail is jandktarpley@verizon.net

 

[Tabasco]

Harry,
First time poster here and I need a manual for my TD7E real bad. Would you be so kind as to send me a copy? My email is turkeybullets@gmail.com Thanks a bunch

 

[chadf350]

i have a td7e dozer am putting some steering brake shoes and discs on it but i can't figure out what kind of fluid it takes in the differental and the final drive and how much each one holds i have a repair manual but couldn't find that information in it if you could help me that would be great thanks chad my email is chad.jones96@yahoo.com

 

[ayrhead]

Hi Chad:
MY TD7E Operator's Manual says the Trqansmission and Torque Converter takes 28 qts. of IH Hy-Tran Fluid, The Transmission takes 24 qts. of IH Hy-Tran Fluid and the Rear Frame takes 42 Qts. of IH Hy-Tran Fluid.
The Sprocket Drive Each housing takes 10 qts. MPL-IH Grade 135H EP or MIL-L-2105B Grade 140 at +120F to +20F or Grade 90 at +70F to -10F or Grade 80 at +10F to -30F
Hydraulic System takes 10 gals. w/o the backhoe of IH Hy Tran Fluid and 14.4 gals. with the backhoe.
Hope that helps you out.
Harry

 

[chadf350]

yes that helps alot thank you so much if you get a chance i would really like to have a copy of the operator's manual thanks chad

 

[ayrhead]

Hi Again Chad:
E-mail me your mailing address and I'll stick one in the mail for you.
Harry

 

[JimInOz]

HI Harry,
I'd appreciate a copy too.
I might have some TD7 Brochures I can send in return.

Regards,
Jim
dozerparts@gmail.com

 

[ayrhead]

Hi Jim:
Should not be a problem send me your e-mail address and I'll put it in the mail.
Harry

 

[g_man]

I am looking at a TD7G and would love to get a copy of your manual. This will be my first dozer if I buy it. The manual would be very helpful. Since I am a brand new member I can't use the mail system yet so I don't know the best way.
I plan on using the TD7G to keep my woods roads open in the winter for my tractor and winch. Hopefully it is up to this but I am not sure.

 

[ayrhead]

Hi G_man:
Please send me your e-mail address. Put it into a reply post. Thanks
Harry

 

[dqdomi]

Td7-E manuels, hi Ayrhead ! Love that tag...

Hi Everyone: I finally have the manual done in *.pdf format. Anyone lokking for a copy let me know and I'll send you a copy.
Harry

I was wondering if you could send me a copy of the manuels please??? Thanks in advance. My e-mail address is derekpayne67@rogers.com...

 

[Jetfab]

Hi Everyone:
Ordered the manuals through binderbooks.com. Should be recieving them in 10 days. I will probably be transferring them over to *.pdf format. It will take me about 2 weeks to do. If anyone out there needs a manual for the TD7-E let me know and I will try to get you a copy.
Harry

Hello Harry,

Is there a chance I could get a copy of the manual/s you have on the Dresser TD7E.

bsowell.jetfab@frontiernet.net

Thanks