• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

2014 259D Right joystick working intermittently

H

Hillmaniac1993

Member
Joined
Nov 3, 2023
Messages
11
Location
Church Hill, TN
I have a 2014 259D that is throwing the codes 2475-3 and 2477-3. The joystick will work intermittently. I can start it up and it will throw the code right away, and not work the bucket at all. Then I shut it down, start it back up and it will work for a min or two then throw the code again. I checked the power supply and I'm getting 11.5 volts between the orange pin and the black pin at the joystick connector. The troubleshooting guide says I should be getting 8 volts on that pin. Anybody have any advice on this? Would this reading be an indication of a bad joystick? Thanks in advance!
 
Nige

Nige

Senior Member
Joined
Jun 22, 2011
Messages
38,736
Location
G..G..G..Granville.........!! Fetch your cloth.
Hillmaniac1993 said:
The joystick will work intermittently.
Click to expand...
That right there strongly suggests to me a wiring issue, either in a harness connector or maybe even in a harness.

Also need to clarify that on some machines the joystick position sensors are powered by a 12v supply from the key switch, on others it is a stabilised 8v supply from the Machine ECM.
 
You must log in or register to reply here.
Top