Paul Steichen
Member
I noticed that the outer front wheel dust cap was missing and upon inspection the bearings are shot too. Not only that but the inner race of the outer bearing spins freely on the axel shaft, and the seal portion of the axel shaft is badly worn too. I can order a new wheel and bearings, etc, but how can this axle be repaired?
Can the axle be pressed out and replaced? Could the axel shaft be cut off and a new one fabed and welded on? I can't imagine that the only solution is to replace the whole assembly...
Any advice appreciated.
Can the axle be pressed out and replaced? Could the axel shaft be cut off and a new one fabed and welded on? I can't imagine that the only solution is to replace the whole assembly...
Any advice appreciated.