IronFlyer
Active Member
My experience is mainly on excavators in the size range of 200 - 330 class, but also occasionally on machines ranging from 80 to 600 class machines, in the functions of:
• Loading trucks with soil / rock aggregate, demolition debris, and wood debris
• Land clearing (including working in close proximity to ground crews)
• Forested service-road rough-in
• Stripping spoil and removing pre-load piles for site preparation
• Loading and operating high volume wood / material grinders (800 - 1,200HP)
• Demolition of commercial structures and concrete sub structures with the use of hydraulic hammer and jaw-pulverizer attachments
• Hard-scaping including sloping and ditching
• Excavating to a specified grade while working with someone on-site taking elevation readings.
• General work using dozers
I also have previous OFA Level 1 first aid and a current St. Johns Standard first aid with CPR-C.
Send me an email or give me a call at 604-834-3031 if you have a position for a hard working guy like myself.
thanks,
Stephan
• Loading trucks with soil / rock aggregate, demolition debris, and wood debris
• Land clearing (including working in close proximity to ground crews)
• Forested service-road rough-in
• Stripping spoil and removing pre-load piles for site preparation
• Loading and operating high volume wood / material grinders (800 - 1,200HP)
• Demolition of commercial structures and concrete sub structures with the use of hydraulic hammer and jaw-pulverizer attachments
• Hard-scaping including sloping and ditching
• Excavating to a specified grade while working with someone on-site taking elevation readings.
• General work using dozers
I also have previous OFA Level 1 first aid and a current St. Johns Standard first aid with CPR-C.
Send me an email or give me a call at 604-834-3031 if you have a position for a hard working guy like myself.
thanks,
Stephan