WANTED: Tri-Axle Hooklift

[John Banks]

Looking for a new(er) HD T-800 (or equivalent Pete, etc), tri-axle, min 50k lb hooklift. Will consider C&C and do our own upfit. Needs big motor-ISX/MBE and ideally a 15 or 18 spd trans, locking rears, etc.

If anyone knows of any trucks like this please email me JohnBanks@JBanks.net

Will travel for the right deal.

Also looking for a brush hog to fit an ASV MD2810

Thanks

 

[tonka]

try www.truckpaper.com


http://www.truckpaper.com/listings/...07&PG=1&guid=DE4171B36F1346329EB4FCE2EC66EE9A

 

[John Banks]

Been looking in Truck Paper, thanks. Most hooklifts are tandems, and the few that are triaxles have small motors/trans. Trying to find a "new" 07 pre-emmisions motor, don't want the emissions BS on a big truck. It's enough of a problem on my '08 CTD - but not for much longer

Found a few C & Cs that will work, we can upfit, but was hoping to find something fitted up to put to work in the next week or so. Time is money.

 

[PETE379]

Im guessing you need a hooklift because you already have some boxes for it?

 

[John Banks]

Im guessing you need a hooklift because you already have some boxes for it?

we have a FL70 single axle hook now with a bunch of containers, and a tri-axle Pete roll-off with some boxes. For us, hooklift is the way to go for a few reasons. We're going to sell the Pete roll-off, and need a tri-axle hook. So yes, we'll also be buying some new boxes.