volvo ec160b lc monitor (info unit) not working

[PineTreeAssassin]

I don’t know about your series of machine but I have had to come out to a customer that has bought a salvage ecm. And I had to program it. One was just 10 numbers off from his machines serial number. I think it’s a anti theft thing.

those were my first thoughts.. Leaning towards aftermarket now. Will keep you guys updated on it.

 

[BigWrench55]

Try unplugging just the ribbon and see if everything comes back online. It’s possible that it’s shorted and putting a load on the canbus circuit causing everything else to fail.

 

[PineTreeAssassin]

Try unplugging just the ribbon and see if everything comes back online. It’s possible that it’s shorted and putting a load on the canbus circuit causing everything else to fail.

It appears to have shorted on one of the pins. And on the circuit board itself

 

[PineTreeAssassin]

Try unplugging just the ribbon and see if everything comes back online. It’s possible that it’s shorted and putting a load on the canbus circuit causing everything else to fail.

Just finished trying that, no luck. I just ordered a programmed monitor. Gonna send mine off to be repaired to hopefully have a backup. Downtime has killed me over this one

 

[volvoeire]

I just installed an aftermarket display on an EW140B ... was cautious about aftermarket but it really is top quality and has worked great thus far!! an send contact details for supplier if needed!

 

[PineTreeAssassin]

I just installed an aftermarket display on an EW140B ... was cautious about aftermarket but it really is top quality and has worked great thus far!! an send contact details for supplier if needed!

I ordered one, and also sent mine back to an industrial electronic repair shop. Hopefully have one back shortly. I paid 450.00 for mine. Comes pre programmed. Glad to hear your’s worked for you!!