1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Service truck for sale

Discussion in 'Equipment For Sale/Wanted' started by willie59, Jan 12, 2018.

  1. willie59

    willie59 Super Moderator

    Joined:
    Dec 21, 2008
    Messages:
    11,695
    Occupation:
    Service Manager
    Location:
    Knoxville TN
    If anyone is interested our service truck is for sale. If no one takes the kit it will be sold at auction in Orlando in February. 2008 Pete 335, Paccar (Cummins) 8.3L, seems I recall it's around 280ish hp, 6 speed Allison auto, 3.75 rear axle, a little over 91K miles. We've had the truck a little over 5 years, turbo and EGR have been replaced. This past summer the catalyst was replaced and DPF cleaned as well as all 6 injectors replaced. Truck is in excellent shape, cab interior is excellent. Equipped with in dash Kenwood/Garmin GPS unit.

    Service body by Maintainer, 14,000 lb three section crane. Miller Bobcat 250 welder. Hydraulic driven compressor. Tool and parts cabinets/drawers already fitted, compartment to store Oxy/Acyt cylinders. 50 gal hydraulic storage tank, 100 gal waste oil storage tank, pneumatic grease pump, 30 gal pressurized water tank. Large and small diameter air hose reels, hose reel for hydraulic tank with dispensing meter, hose reel to fill and discharge waste oil tank, hose reel for grease pump, hose reel for water tank, hose reel for torch, cable reels for welder. Set up with booster plug at front bumper that will boost both 12 and 24 volt, booster cables included.

    The only quirk the truck has is with the variable geometry turbo that also works as an exhaust brake, sometimes it gets a signal to work the exhaust brake even when the switch is turned off. It doesn't really affect the operation of the engine when driving, it's just annoying when you're trying to ease around on a jobsite and that exhaust brake is engaging when you let up on the throttle pedal and you don't even want the brake on at that time. The problem seems to come and go with no rhyme or reason and no shop has been able to figure out what's causing it to happen. Aside from that you don't have to do anything to the truck, simply load your tools and go to work. Asking $95,000. If you're interested contact Kevin 865-688-3133. I can provide more pics if needed.


    20171025_095139.jpg
     
    Last edited: Jan 12, 2018
  2. John C.

    John C. Senior Member

    Joined:
    Jun 12, 2007
    Messages:
    4,119
    Occupation:
    Machinery & Equipment Appraiser
    Location:
    Northwest
    If I were only 35 years old again!!!
     
  3. willie59

    willie59 Super Moderator

    Joined:
    Dec 21, 2008
    Messages:
    11,695
    Occupation:
    Service Manager
    Location:
    Knoxville TN
    You and me both John C!
     
  4. xgiovannix12

    xgiovannix12 Senior Member

    Joined:
    Feb 22, 2012
    Messages:
    422
    Occupation:
    Operator/Mechanic/Truck driver
    Location:
    New York
    pretty truck GL with the sale
     
  5. willie59

    willie59 Super Moderator

    Joined:
    Dec 21, 2008
    Messages:
    11,695
    Occupation:
    Service Manager
    Location:
    Knoxville TN
    If no one purchases the truck it will be going to absolute auction. Whatever the price then, some wrench bender is going to get a nice truck
     
    FSERVICE likes this.
  6. FSERVICE

    FSERVICE Senior Member

    Joined:
    Apr 3, 2009
    Messages:
    630
    Location:
    indiana
    willie have you had any offers on a mechanic job?? are you on unemployment or still around the shop??
     
  7. willie59

    willie59 Super Moderator

    Joined:
    Dec 21, 2008
    Messages:
    11,695
    Occupation:
    Service Manager
    Location:
    Knoxville TN
    If it doesn't fall through, for them waiting for me to wrap things up here, I'm going to work for a local steel supplier/fabrication/erection shop taking care of their machines and doing plant maintenance. It's only about 2 miles from my house, I'm hoping it works out well.
     
    Hallback, old-iron-habit and FSERVICE like this.
  8. FSERVICE

    FSERVICE Senior Member

    Joined:
    Apr 3, 2009
    Messages:
    630
    Location:
    indiana
    good luck with it & if you need anything just holler;)
     
  9. willie59

    willie59 Super Moderator

    Joined:
    Dec 21, 2008
    Messages:
    11,695
    Occupation:
    Service Manager
    Location:
    Knoxville TN
    Thanks brother. :cool:
     
  10. walkerv

    walkerv Senior Member

    Joined:
    Jan 22, 2016
    Messages:
    353
    Location:
    wingate nc
    Why are they getting rid of the truck if you don't mind me asking . I wish I had the capital to buy it but I maybe making a carear change myself soon
     
  11. Delmer

    Delmer Senior Member

    Joined:
    Jan 4, 2013
    Messages:
    4,455
    Location:
    WI