• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Need help with a Case 301BD

K

kefloyd1980

Member
Joined
Nov 30, 2010
Messages
6
Location
Hattiesburg
I have a case 301bd I have torn down. Has been worked by the local machine shop to include new sleeves and cam bearings. Also have a complete rebuild kit on the way. My problem is that I have not been able to find a repair manual on this engine so I can have all of the torque specs, clearances, and timing procedures.

I even have a new cam and crank going into the engine.

Anyone have any information on how to acquire a repair manual for this engine? The local Case dealer has told me they were unable to.

Thank you for taking the time to read my post.
 
K

kefloyd1980

Member
Joined
Nov 30, 2010
Messages
6
Location
Hattiesburg
It's an old (wanna say 65) Model 475 Cable Layer. All of the accessories but the blade as been removed. According to the local Case dealer, Case sold the rights to the machine to another company (unable to recall the name) so they do not have access to literature. I have found that they are not able to get several parts either.
 
O

oly

Member
Joined
Mar 24, 2008
Messages
7
Location
Alaska
Occupation
API 653 Inspector
gas or diesel

I am not familiar with that piece of equipment. I have a case 420 gas tractor that is about a 1965. I have the manuals for it. It's a four cylinder. Can find the specs if it's close enough to do you any good.
 
T

Tinkerer

Senior Member
Joined
May 21, 2009
Messages
9,433
Location
The shore of the illinois river USA
You must log in or register to reply here.
Top