-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Need cab for D5H
- Thread starter JDR62
- Start date
Jeff,
Would this work ?
http://cgi.ebay.com/Caterpillar-D4H...744?pt=LH_DefaultDomain_0&hash=item2eaf6de618
It's not a factory cab but I suspect trying to put a factory cab on a non-factory dozer would be a major undertaking. I have a Komatsu D31 and when looking at the parts manual, many of the parts, you wouldn't even think about, are different between the factory cab models & the the non-cab models. You would almost need to have a complete donor dozer with cab to use.
Would this work ?
http://cgi.ebay.com/Caterpillar-D4H...744?pt=LH_DefaultDomain_0&hash=item2eaf6de618
It's not a factory cab but I suspect trying to put a factory cab on a non-factory dozer would be a major undertaking. I have a Komatsu D31 and when looking at the parts manual, many of the parts, you wouldn't even think about, are different between the factory cab models & the the non-cab models. You would almost need to have a complete donor dozer with cab to use.
Taylortractornu
Charter Member
Since we wont get a new dozer at work we are buying an after market cab with AC and a filter and Pressurization. Heres the link to Kenco . http://www.kencomfg.com/ THey have some great aftermarket parts. We have a ordered some roller frame guards and expected they would be high and that they like some products would take a little fitting. These were cheaper and fell into place with every hole a perfect fit.
We are about to order a set of side panels for the D5 to we bent ours last week when the compactor was down.
We called Cat and a cab was 18 000, plus air was 4200 and the Pressureiation was another 4 000. The Kenco unit will be about 11000 in all. Its a complete set on unit on the D5. Take off our rops and they drop right on.
We are about to order a set of side panels for the D5 to we bent ours last week when the compactor was down.
We called Cat and a cab was 18 000, plus air was 4200 and the Pressureiation was another 4 000. The Kenco unit will be about 11000 in all. Its a complete set on unit on the D5. Take off our rops and they drop right on.
LonestarCobra
Well-Known Member
I second the Kenco. I have installed a few on D6H and D6R,s. They are not as nice as a Cat cab, and make working under the floor a little harder, but it is probably the best bet on this. :my2c
AmerIndependent
Site Sponsor
What's your machine serial #? I may be able to locate something for you.
EZ TRBO
Senior Member
http://www.jjscheckel.com/
give them a call, down not too far from you just south of DBQ. Pretty good guys to deal with.
Trbo
give them a call, down not too far from you just south of DBQ. Pretty good guys to deal with.
Trbo
Last edited: