Had 5 hours today to do more work. Got the axle put together and installed in the machine. Got the brakes adjusted, then adjusted all the linkage. The brake linkage was whacked out. Took an hour or so to get it all dialed in. Next weekend I should get the wheels on and driving around. The left wheel seal was leaking so the inside of the rim is loaded with oily dirt. I need to scrape and clean that.
Anyone have tips on how to fill the axle?
Suction gun is out of the question. 4.5 gallons would take forever.
Thought of using a transmission funnel and pulling the floor plate and pouring it in.
Oil is in a pail and I was thinking maybe some kind of drill or electric pump?