ColdBlackWind
Well-Known Member
Getting 350-3 lift linkage voltage above normal, 723-2 engine speed sensor #2 data erratic intermittent or incorrect and 636-2 engine position sensor (I didn’t get a pic of this alert but think verbiage was the same as 723-2). I have searched the forum and found t shooting procedures posted by Nige which I appreciate. I don’t have a service manual but with the frequency of these issues reckon I better get one. Help on source for that would be appreciated.
Getting ready to try and run the issues down but have no idea what the location of each sensor is. I suspect the two engine sensors are close together? This was a nasty experience as the machine locked down traveling at 75% throttle and it threw me around pretty good messing up a shoulder.
Getting ready to try and run the issues down but have no idea what the location of each sensor is. I suspect the two engine sensors are close together? This was a nasty experience as the machine locked down traveling at 75% throttle and it threw me around pretty good messing up a shoulder.
Last edited: