Michigan 75iii bucket pins

[wentworth]

Hi - I'm looking for the boom and pushrod pins and bushings to connect the bucket to the loader.

The boom to bucket pins are about 2.25" diameter x 6" long, and bushings are about 2.75" o.d. x 2.25" i.d.

The pushrod pins are 1.5" diameter x 10" long.

Are pin/bushing parts from other machines able to match?

Thank you!

 

[Edilgru]

Hi wentworth,
if you need parts for old MICHIGAN 75III, contact www.deltaimport.it
Best Regards
Edilgru

 

[Ryan151]

If you can't find them look up ebushing.com give there office a call they have some bushings not listed too. As for pins you can buy some 4140 steel rod from McMaster care and make your own I've done it and it works well