2000 Jlg 35e no reverse please advise
Hello, my name is Brett Cooke. I recently purchased a 2000 jlg 35e and there is no reverse. I was reading a thread about a jlg 40e and you helped them a lot. Hoping I could get your thoughts.
I tested pin #4 orange and pin #14 white/blk.
All tests done with ground attached to B- on motor controller.
forward
left
s1. 47.5v
s2. 47.9v
a1. 47.5v
a2. 26.5v
right
s1 48.1v
s2 48v
a1. 26.8 v
a2. 25.3v
reverse
left
s1. 49.2v
s2. 49.1v
a1. 48.8v
a2. 48.2v
right
s1. 49.2v
s2. 49.1v
a1. 48v
a2. 47.5v
dc motor controller 17pin
ground on b- of controller
orange pin 4
neutral 49.1v
forward 47.1v
fwd crawl 0.07 neutral to 0.13 full
reverse 47.9v
rev crawl 0.07 neutral to 0.13 full
white/blk #14
neutral 4.01v
full forward .057v at full
full reverse 4.03v at full.
Motor controller doesn't have any flash codes.
Could this be a bad joystick?
I'm new to this from and wasn't sure how to start a thread, hope this is ok?
Thanks,
Brett
Hello, my name is Brett Cooke. I recently purchased a 2000 jlg 35e and there is no reverse. I was reading a thread about a jlg 40e and you helped them a lot. Hoping I could get your thoughts.
I tested pin #4 orange and pin #14 white/blk.
All tests done with ground attached to B- on motor controller.
forward
left
s1. 47.5v
s2. 47.9v
a1. 47.5v
a2. 26.5v
right
s1 48.1v
s2 48v
a1. 26.8 v
a2. 25.3v
reverse
left
s1. 49.2v
s2. 49.1v
a1. 48.8v
a2. 48.2v
right
s1. 49.2v
s2. 49.1v
a1. 48v
a2. 47.5v
dc motor controller 17pin
ground on b- of controller
orange pin 4
neutral 49.1v
forward 47.1v
fwd crawl 0.07 neutral to 0.13 full
reverse 47.9v
rev crawl 0.07 neutral to 0.13 full
white/blk #14
neutral 4.01v
full forward .057v at full
full reverse 4.03v at full.
Motor controller doesn't have any flash codes.
Could this be a bad joystick?
I'm new to this from and wasn't sure how to start a thread, hope this is ok?
Thanks,
Brett