Hi all. We have a 980B 89P05XX that doesn't have 4th gear. A local guy has a good trans from a 42H1XXX. Will it work? I've gone through the parts list and the case is different. I know it's a strange question but I'm hoping some one will know. Thanks Randy
Hey Bob It's been out since I bought it 5-6 years ago. It doesn't try to move at all. Just like it's in neutral. Thanks Randy
Hey Bob That's interesting. Do you know the difference from a 980 42H and a 89P 980B tranny? I went through the whole parts list and the only difference was the case that I could see. I've found a NOS rebuilt one for a 42h for cheap and would like to know what I would have to do to use it. Thanks again Randy
My 980B transmission case # was 9s8777
Randy you might be better to take yours apart and see if Hector has the parts you need. Just a clutch pack and seals for sure and I would recommend the #4 clutch housing perchance it's got the same problem as the old one I encountered. I can't tell you how to check your housing. If you use your old clutch housing make sure the machine runs free while coasting in any gear. Any dragging pull it back out and change the housing.Hey Bob That's interesting. Do you know the difference from a 980 42H and a 89P 980B tranny? I went through the whole parts list and the only difference was the case that I could see. I've found a NOS rebuilt one for a 42h for cheap and would like to know what I would have to do to use it. Thanks again Randy