Drott 40

[tee48wil]

I bought a Drott 40 and the pillow block bearings are no good. Does anyone have any information on replacement parts?

 

[John C.]

Take them to a bearing supplier who should be able to identify them and supply replacements.

 

[tee48wil]

Hi John,
I took the bearing to Case and they said just the bearing would run $1,500. I thought that was very high. Do you think a bearing supplier would be cheaper?

Thanks

 

[Jonas302]

Yes could be half as much at a bearing house bring it with so they can measure it up

 

[Jonas302]

https://www.amazon.com/S242157-Bearing-Case-Crawler-Excavator/dp/B00V3F2DHY
Might be able to find for less than these at $750

 

[tee48wil]

Jonas,

Thank you very much for the help. I will check it out!

Thanks

 

[sheepfoot]

What series 40/40B/D/E They are not all the same.

 

[tee48wil]

What series 40/40B/D/E They are not all the same.

it is a series D. The large pillow block bearing I can't find.

 

[Coy Lancaster]

If you can get the Case part# or manufacture# and do a google or bingg search and see what you find there.