BIS
Member
Morning All, I am looking to see if anyone could help me locate where I can get a list for flash codes we currently have code 036 1599.05 as an active code but I am having trouble looking up the definition.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
D6 Dozer Help needed
- Thread starter BIS
- Start date
dblaneyfan
Well-Known Member
CID 1599 FMI 05 Engine Fan Pull Solenoid open circuit
Conditions Which Generate This Code:
While the solenoid driver output is off, the Electronic Control Module (ECM) detects battery voltage that is above normal.
System Response:
The ECM will log the diagnostic code. The fan pull solenoid is disabled.
•There are no performance effects.
Test Step 1. Perform the following diagnostic procedure: Variable Pitch Engine Fan Circuit - Test
Results:
•OK - STOP
Conditions Which Generate This Code:
While the solenoid driver output is off, the Electronic Control Module (ECM) detects battery voltage that is above normal.
System Response:
The ECM will log the diagnostic code. The fan pull solenoid is disabled.
•There are no performance effects.
Test Step 1. Perform the following diagnostic procedure: Variable Pitch Engine Fan Circuit - Test
Results:
•OK - STOP