-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
cat d6r slow steering
- Thread starter naheed
- Start date
looks like a pretty neat job of the scroll box
hope it goes well, don't forget to keep temps up
Mark
gruntscoreboard
Well-Known Member
Had the same issues and dunno what to do too.
Well done. Good to here a success story
Mark
naheed
Well-Known Member
Hi,
All the info you need is in this forum, go through the previous messages , make a scroll box and you also have all the info you need on calibrations and fault codes
MHDim
Active Member
From my experience, if you try a calibration using ET, it notifies you directly of an active code (as in, you see a pop-up message on-screen) only if the respective error should negatively impact the result of the calibration you're performing. If it's an unrelated service code, it does not show up by itself; you have to check them yourself - click toolbar on Diagnostics -> Active Diagnostic Codes, or press F3 on the keyboard.
I also love using the clicker box on dozers, even loaders & graders sometimes. On dozers actually, I've become so familiar with it, that I actually prefer using it 90% of the time, rather than connecting the laptop via ET.