• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Cat 962G max modulation current to solenoid valves.

A

artinhyko

New Member
Joined
Dec 30, 2016
Messages
3
Location
Albania
Hello friends,

I have a problem with caterpillar sn:3bs00338 (962g).
How can i enter calibration mode without control service tool.
Thanks in advance.

Regards,
Artini
 
M

Mark250

Senior Member
Joined
Aug 30, 2015
Messages
1,243
Location
victoria,Australia
Occupation
heavy equipment technician
you don't need the service tool to enter service mode
check out the 4C-8195 post in the dozer section ,if you have queries after you read the post please ask
What system do you want to calibrate? transmission or hydraulics
Mark
 
Last edited:
A

artinhyko

New Member
Joined
Dec 30, 2016
Messages
3
Location
Albania
Service tool with two push buttons

Mark250 said:
you don't need the service tool to enter service mode
check out the 4C-8195 post in the dozer section ,if you have queries after you read the post please ask
What system do you want to calibrate? transmission or hydraulics
Mark
Click to expand...

Thanks for reply.
I just checked and i realised that the machine has two push buttons.
Now using the menu "maximum modulation current to solenoid valves" on sis, how can i increase maximum current,
because i have 18 ohm solenoid instead of 6 - 12 ohm solenoid.
 
You must log in or register to reply here.
Top