Cat 257 Final Drive leak

[vement]

Hello , I am new to this forum. I have a 2005 Cat 257. CMM02114. Been a great machine but noticed fluid leak from the final drive. This is coming from front of final drive where sprockets mount.
I can't seem to find a seal kit. I can find complete replacement drives but thought it might just be outer seal. Any help greatly appreciated.
Thank You

 

[Nige]

Can you post a photo showing where the leak is coming from.?

 

[vement]

 

[92U 3406]

Duo cone seal's gone. What's the oil level in the final drive? A blown motor seal will fill the final drive up and then blow out the duo cone seal.

 

[Nige]

Well you have a problem. The Duo-Cone seal assembly (circled) is not listed under a separate Part Number. Neither is it included in the seal kit listed for the motor. However as my learned friend above points out, it may be a problem inside the motor and the leaking Duo-Cone is actually a symptom rather than being a root cause.

 

[92U 3406]

Well you have a problem. The Duo-Cone seal assembly (circled) is not listed under a separate Part Number. Neither is it included in the seal kit listed for the motor. However as my learned friend above points out, it may be a problem inside the motor and the leaking Duo-Cone is actually a symptom rather than being a root cause.

View attachment 308727View attachment 308728

That's what I was afraid of. I've run into that issue a couple times, Cat wants you to buy a new/reman assembly IIRC. Might have to give the aftermarket a shot and see if that seal is available elsewhere.

 

[Nige]

It's also worth pointing out that this is a 20+ year-old machine and when this product line was first introduced a lot of the components (e.g. pumps, drive motors, etc) were obviously not designed to be repairable in the field.

 

[vement]

Thank you both for your information. It is an old machine. I will search some aftermarket companies and see what I can find. If not I assume I need to buy a new final drive for that side.
Thanks again super helpful.

 

[Nige]

A few Part Numbers for you to use in your search. Your motor is probably an original 222-5662. There is an updated P/N 280-7862 or a Reman 10R3338. All three will fit.

 

[vement]

Thank You Again!