-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Case 580 super m
- Thread starter 250quality
- Start date
gggraham
Senior Member
- Joined
- Feb 13, 2009
- Messages
- 589
- Location
- London Ontario Canada
- Occupation
- Licensed Heavy Duty Equipment Mechanic
That is your foot throttle sensitivity. So say you are crossing a rough site at half throttle should you hit a bump and your foot bounces up and down on the throttle at the low setting it delays how quickly it will throttle up or down.
Coy Lancaster
Senior Member
You'll probably need to have your throttle control recalibrated, if not replaced.
250quality
New Member
Turned out 4 wires in the harness running beside the hydraulic filter wore through. Repaired and worked perfect until today. Now has a broken wire symbol on the dash and is in limp mode. Checked all previos broken wires and all are good. Looked everywhere for the issue but probably going to have to bow down and get Case here.