Hello.
I have a bobcat T250 that has hydraulic oil foam up and out for the resevoir cap quite heavily. Its does this after about 10-20 mins of running it from start up. The lift arms start to jitter when the issue occurs.
I have replaced the suction hose from the reservoir tank to the pump, and hose coming from filter to the T fitting at the pump along with new o ring at fitting to t
pump, new clamps and a hydraulic cap. Still having problems and not quite sure were else to look, one post mentioned seals on the drives but not sure what they meant. Any help much appreciated, thank you!
I have a bobcat T250 that has hydraulic oil foam up and out for the resevoir cap quite heavily. Its does this after about 10-20 mins of running it from start up. The lift arms start to jitter when the issue occurs.
I have replaced the suction hose from the reservoir tank to the pump, and hose coming from filter to the T fitting at the pump along with new o ring at fitting to t
pump, new clamps and a hydraulic cap. Still having problems and not quite sure were else to look, one post mentioned seals on the drives but not sure what they meant. Any help much appreciated, thank you!
