mitch504
Senior Member
Hey Q, I think it's one Holley and one Rochester; but my money's on the rodent.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
7.3 f350 satrting issue
- Thread starter brian falcone
- Start date
stuart olson
Active Member
hell your both wrong they came standard with six stromberg 97's and a 6-71 blower
if you go direct with a push switch make sure glow plugs are 12 volt and not 3 volt
you dont want to melt the ends off
have you tried pluging in block heater to see if this helps
also check for air in fuel
6.9 and 7.3 were bad for this likly sources of air intrusion is water seperator on fire wall and small return line on top of injuctors
a good way to tell is to remove small line off fuel filter plug port put small line in a can with fuel start and see if you get any airbubbles in can
good luck
tom
you dont want to melt the ends off
have you tried pluging in block heater to see if this helps
also check for air in fuel
6.9 and 7.3 were bad for this likly sources of air intrusion is water seperator on fire wall and small return line on top of injuctors
a good way to tell is to remove small line off fuel filter plug port put small line in a can with fuel start and see if you get any airbubbles in can
good luck
tom