tbatthetop
New Member
So we received this piece of machinery on Saturday as a gift for doing such great work. It seemed a little sluggish to start. Owner said the start button was corroding and needed a little wiggle to get her juices flowing. (Possibly bad starter) So we did, ran great for about 6 HRS on a full tank. The gauge is faulty and always reads full. Some electrical work has been done by others and looks very unprofessional. Anyways we thought hell maybe it is out of diesel, so we put in 10 gallons. The solenoid on the injection pump is not getting 12V, which makes me think very bad wiring hack job. Or possible fuse blew. All fuses work except for 2. (1) 30AMP lower right and the one above. The one above was missing so I don't know what to replace it with. Replaced the 30 and still nothing. No power. Does this power wire just go to the switch side of the key or to the fuse terminal?
The battery is charged and the starter well seems very sluggish, thinking about replacing it.... or rebuild...
We did run over some sticks and I did see a couple in the under carriage , and the wires under there look like they have not been hooked in a long time.
Any thoughts....
The battery is charged and the starter well seems very sluggish, thinking about replacing it.... or rebuild...
We did run over some sticks and I did see a couple in the under carriage , and the wires under there look like they have not been hooked in a long time.
Any thoughts....