• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

12 H Grader early model

ZappyFellow

New Member
Joined
Aug 19, 2023
Messages
3
Location
Onslow
Hello,
I need a wiring schematic for this grader
Got at least 2 problems
1st is the right hand fuse bank has no power going to it
2nd is I noticed on one side of injector pump (I think that is what it is) there was no nut hold the wire on one side and could see where one had arced out
when I put the wires on with a new nut why cranking over the wires smoked and burnt the insulation
Thank you
 

ZappyFellow

New Member
Joined
Aug 19, 2023
Messages
3
Location
Onslow
Hello Nige
Sorry abut my delay getting back to thank you got a lot going on here,
That diagram was super helpful and have fixed everything except right fuse bank thank you very much
I have traced the main purple wire back to the main relay and connectors 14, 24 and 31 along the way
will have to make sure the cows have not pulled any connectors out and find main relay see how the purple wire is connected to the main relay and test
Thank you
 
Top