-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Search results
-
-
Donaldson air filters with housing or without
bump.- gimpyrobb
- Post #3
- Forum: Equipment For Sale/Wanted
-
-
Donaldson air filters with housing or without
Bump.- gimpyrobb
- Post #2
- Forum: Equipment For Sale/Wanted
-
Enginaire pre filters
Keep most dirt out of your intake air before it hits your filter. These are the 6-350, rated up to 850cfm. Made for 6 inch intake duct. http://www.enginaire.com/composite-precleaners/ $75 each plus shipping or if you want a box of 4, $200 plus shipping.- gimpyrobb
- Thread
- Replies: 2
- Forum: Equipment For Sale/Wanted
-
Donaldson air filters with housing or without
So I've got some big air filter housings with filters available. Its a Donaldson model number G140526. I'll be selling these for $75 plus shipping. I also have the optional P532504 filter available. Most of them are new not in boxes. I do have a few in boxes for $100 plus shipping. Finally...- gimpyrobb
- Thread
- Replies: 2
- Forum: Equipment For Sale/Wanted
-
-
Puradyn bypass oil filters
I have some surplus bypass oil filters available if anyone is interested. They are originally for the Cat C7 motors, but will work on any motor. The heater built in is for 24v, but a call to the manufacturer confirms a 12v heater is available. Comes with instructions and fittings. $125 plus the...- gimpyrobb
- Thread
- Replies: 1
- Forum: Equipment For Sale/Wanted
-
24v/12v remote controlled Golight
24v black GoLight spot lights. Joy stick operation in vehicle, wireless remote outside vehicle. Open it up and remove a resistor, it works on 12v! $165 each shipped. $850 for a case of six. Designed for use in all weather conditions and produces 1,300 lumens of intense light output...- gimpyrobb
- Thread
- Replies: 0
- Forum: Equipment For Sale/Wanted
-
Auto Crane 5005h
I was thinking of dumping it on its side and using the mag drill to drill out most of the pin(up to the bend), then using a cutting disk on a grinder and/or sawzall. I have a plasma cutter too, but I hate to use it in close quarters. Its an older unit and I burnt out the torch like that once(it... -
Auto Crane 5005h
Well my buddy is back at the shop and I got some work done! I'm not looking forward to removing the boom lift cyl pin, Ha! Ihave not heard back from the crane company with the pedestal either. I might try calling Friday. -
Auto Crane 5005h
I could have a lot done so far but, my buddy who's shop I keep it at, has not been in since Monday. Thats 2 days of work I could have done gone. I know this will be a slow process, but every little bit helps! I'm gonna have to get a set of keys from him next time I see him. I will try to keep... -
Auto Crane 5005h
No, I have no interest in a 5ton after I sell my wrecker. The 939 series is wonderful to work on with the tilt hood and air brakes(I work as a mechanic for a guy that sells them), but I like my deuce! With the plates on the side being as rippled as they are, they have put a "hurtin" on the... -
Auto Crane 5005h
Well, I have my amphenol plugs, so I can cut the wired remote and make it a quick-connect! I am in the process of removing the boom and elevation cyl to work on the pedestal. I got this crane cheap, cause it was on a truck involved in a roll over. I was going to cut off the sides, have them... -
Auto Crane 5005h
Thanks, AC actually emailed the correct one to me after I sent them the serial number. The 5005h has had MANY revisions, and I'm pretty sure I had found the right one prior to talking with Bob, but now I KNOW I have the right one. -
Auto Crane 5005h
Thanks CM. Looks like just the bar is $350 from AC. I guess I will have to clean some work space around my mill and make some chips! -
Auto Crane 5005h
I have been in touch with Bob H at AC. He sent me the manual for my crane and informed me the part number I am looking for is 357158. I found the part I need, attached to the hoist at b&b for $2800. Thats out of my league. -
Auto Crane 5005h
Thanks Bob, you have done a lot to your truck and it shows! Always happy to help. Fservice, this crane is for personal use and I can't justify AC's prices for something that I will not use to make me money. I have an Austin Western military crane and have decided its too much crane for what I... -
Auto Crane 5005h
I ran across the B&B website last night. Very helpful. If I don't hear from Ramsey, they are the first on my list. -
Auto Crane 5005h
I figured I could always fall back on them, but their prices are crazy! This is the 3rd one I am working on and the largest. I really like the simple designs and good layout of components.