• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. O

    Need service / parts manuals for IR Gyro-Flo 160

    Need info for this old compressor. Duetz engine runs fine. Compressor housing needs repair. Thanks in advance,,,Doug
  2. O

    Needing windshield 580sk

    Flat glass? Call local glass shop, have them cut one to fit. Replaced various pieces of equipment glass that way.
  3. O

    Wanted: complete 340A jakes for a CAT 3406E

    need the entire set up. Installing on truck that never had jakes. Thanks Doug (PM me)
  4. O

    Cat 262b bogging under throttle

    might try taking off the fuel tank cap, system might not be venting, might explain the "shut it off runs for a short time" also
  5. O

    hydraulic oil temp warning light

    sounds correct from here!
  6. O

    hydraulic oil temp warning light

    found this, looks like a temp switch (#29) on the end of a manifold, part no 132049,,,hope this helps,,all I got
  7. O

    Another What is This Thing?

    Bushing driver?
  8. O

    hydraulic oil temp warning light

    Yes, just an easy way to tell if the sensor is defective or the problem is in the wiring
  9. O

    hydraulic oil temp warning light

    Find the "hydraulic temp switch" disconnect #40 light green wire. See if the light goes out, if it doesn't #40 wire may have rubbed through and is grounding somewhere.
  10. O

    hydraulic oil temp warning light

    page 75 wiring diagram,,, hope that helps
  11. O

    2001 international 4700 dt466e regular everyday people issues with them (NO POWER)

    Update to above post. The debris stuck in the regulators I have seen. Can't be the check ball, it would have to go through the fuel filter. Not sure what it was, will have to check closer next time
  12. O

    2001 international 4700 dt466e regular everyday people issues with them (NO POWER)

    Few ideas. Check fuel pressure under load, should be around 60 psi. Check for fuel system restriction less than 4". There is a check ball on the top of the fuel filter prescreen housing, the updated check balls are yellow (you can remove the plastic cover with a quarter). You can check the fuel...
  13. O

    Hooray!!!

    Most Generators and forklifts draw liquid from the tank, then convert to vapor at the engine. You need the correct tank, to draw liquid.
  14. O

    Cummins B3.3 compression adapter

    Does this engine use glow plugs? If it does find an adapter for the glow plug hole.
  15. O

    Ls185.b crank no start

    I don't know this machine. If it was running and died suddenly, I would check for a fuel shutoff that quit. If it died slowly I would check for fuel delivery issue.
  16. O

    Service Manual Trading Post

    Thanks,,,,jdw08@yahoo.com
  17. O

    Cat 416b

    check your email,,, hope it helps
  18. O

    Cat 416b

    email address?
  19. O

    Ford A66 wheel loader

    have an email address?
  20. O

    JD450 Track Loader will only run 3 minutes and dies

    make sure the vent tube inside the fuel tank filler neck is clear.
Top