• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. M

    Please Help Cat D8L Transmission Overheating

    We had a D8L 53Y1864. Had the same problem with the transmission overheating. We put it on a slight incline to make sure it would roll in neutral to see if the brakes were hanging up. It would roll so we assumed that wasn't the problem. We check tranny cooler and it was clean. Decided that the...
  2. M

    Cat 926 transmission installed

    didn't want to pull the cab so I did it my way.
  3. M

    D8L trans over heating

    I had a d8l 53Y2499, had the same problem. put on a slope to see if it would roll in neutral to eliminate a dragging brake and it seemed to be fine. pulled the cooler out and cleaned it, still overheating, took the converter out rebuilt it, still overheating. Finally disconnected and cleaned...
  4. M

    need cat skid steer door

    I am looking for an early style cat skid steer door. Just bought a cat skid steer door, seller said it would fit all cat skid steers but it does not fit mine. it fits the B model cats. anyone know where I might be able to locate one? Cat wants 1450.00 for a new one. Thanks, Mike
  5. M

    case 580E shuttle

    looking for a master rebuild kit
  6. M

    Cat 416C parts for sale

    Have a boom, standard stick, bucket linkage, right outrigger cylinder, boom cylinder, stick cylinder, bucket cylinder, swing cylinders, loader arm and front bucket cylinders ( for IT), fuel tank, complete rear end, complete 4 wheel drive front end, front drive shaft guard, and many other parts...
  7. M

    WTB a swing frame for a John Deere 310D

    need early style Thanks, Mike
  8. M

    case 580E shuttle

    anyone know who sells aftermarket rebuild kits for a case directional shuttle? Thanks, Mike
  9. M

    Cat 246 withe 3034 injector pump help

    Just finishing rebuilding the 3034 in my 246. oil pump broke and I spun the main bearings. I bought a new block from Cat and a used crank. Motor is all together except for the injector pump. I know that it takes shims to set it but I do not have the manual for this procedure. Anyone know the...
  10. M

    Cat 246 with blown engine, looking for parts and advice pls

    Turbo is in great shape. I had to buy the timing cover from Schafer for 125.00. When my oil pump broke, it but a gouge on the machined surface that the pump rides on. total cost on all the parts was just under 3600.00 so I think I did pretty good. My Cat dealer gave me a price of 2284.66 for a...
  11. M

    Cat 246 with blown engine, looking for parts and advice pls

    I have the same problem with my 246. The oil pump broke the casting just as yours did and I spun all my main bearings. I bought a new surplus block from my local cat dealer for 1450.00 (thru cat used parts) and bought a good crank from Schaefer Enterprises for 750.00. The rings, seals, gaskets...
  12. M

    JD 310D broken swing frame

    Thanks for the help. I'm going to my local john deere dealer and see what they can come up with. Probably going to end up buying the new one for 4000.00 instead of a used one for 2000.00
  13. M

    JD 310D broken swing frame

    Checked the late 310c's and they have a different part number
  14. M

    JD 310D broken swing frame

    That's the part number I also came up with for a new frame. I am trying to find out what the difference is between earlier frame, AT176496 witch I haven't been able to find used and the newer frame, AT176082 that I have found used.
  15. M

    JD 310D broken swing frame

    Hi all, I have an early 310D ( serial# 796510) backhoe with a broken swing tower. I have not been able to find a part number on the swing frame that matches the JD part numbers ( the only numbers I 0000 can find are T151534 and T151540) . I am trying to locate a used frame and found a used one...
  16. M

    sevice manuals

    Looking for manuals for a John Deere310D and a Cat 246 skid steer. Thanks in advance, mike
  17. M

    Cat 246 blown motor

    will do. Thanks all
  18. M

    Service Manual Trading Post

    I could use a JD 310D manual and a Cat 246 skid steer manual. Thanks, Mike
  19. M

    Cat 246 blown motor

    thanks for all your help
  20. M

    Cat 246 blown motor

    I was going to winch it on a flat bed but didn't know if that would break the hydro's
Top