• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. T

    Damn!!!

    what are you stuck in??
  2. T

    Question for distributor drivers

    Hi sticky, Suck some diesel back through the nozzle while it is sucking. When done at the end of the day dump a little diesel in the intake cap and let it soak overnight. I have never operated a Rosco but have done this with Etnyer distributors. Telescooper
  3. T

    Question for Paver Operators.

    Ok, I see. Yep its a widener, I think its a little more difficult to be pushed by a widener then a paver. Just drive straight dont play with the steering wheel to much. Just my thoughts, Telescooper
  4. T

    Question for Paver Operators.

    Are you backing into a widener or a paver?
  5. T

    Question for Paver Operators.

    Funny thing that is what I used to tell to drivers. They play the wheel all the time, make little adjustments. Paver operators don't like to steer any more than they have to either.
  6. T

    Question for distributor drivers

    If your oil squirter is old, even if it has a computer, you will have to use the slide rule that came with your truck. Newer distributors just punch in the desired rate, however refer to the manual. The whole process is still pretty simple. Before you can accurately apply the product at the...
  7. T

    Trench collapse in Pa

    In the one incident it was a trench collapse, in York. The other just a few days later was an incident at the Holtwood dam project. The dam accident the person was struck by an excavator bucket. How tragic both could have been avoided. Telescooper
  8. T

    Vogele Vision Paver

    I operate a Vogele vision, nice tractor. Steering is excellent, good visabilty, a lot of other good features. I don't care for how long it takes to boot up. What are you calling a wedge screed? Telescooper
  9. T

    Vogele Super Pavers

    bean, How did you make out with the Vogele super paver? What was the problem? Telescooper
  10. T

    Vogele Super Pavers

    Who was your Vogele rep? Ours was Tom, he covers Eastern Canada. Our Vogele has a vibratory screed, no tamper bar on ours. Not maintianing a consitant head of material, will cause problems. Not paving at a consistant speed can also cause problems. Are your augers set at the proper hieght? They...
  11. T

    Vogele Super Pavers

    I operate a Vogele paver, with a Carlson vision screed 5030 or something like that. We have encountered the washboard with other pavers also. One time the washbord was caused by incorrect angle of attack with the screed. On another occasion because of the screed srews ( hand cranks) needed...
  12. T

    Grease Guns

    Hey about ten years ago I had one with a slider on it. Never seen one like it since. The button types dont care for them. Our new paver has them for the steering. I think Alemite stuff is pretty good. Auto greasers when they work properly are pretty tuff to beat. just my 2 cents worth...
  13. T

    Any Gradall operators here

    Dee When having to cut and swing at the same time keep you cutting edge turned into the cut, You will feel when it is at the correct angle. when booming in and cutting you will have to constantly keep the opening the bucket to keep the cutting edge cutting, the angle of the edge will change...
  14. T

    Any Gradall operators here

    Hi Dee When ditching with a Gradall you really should not be swinging. The movement should be boom and bucket. When doing round bottom ditches do them off the side. Place the digger cab as close to 90 degrees from the carrier as you can, this will help you keep the ditch will be straighter...
  15. T

    gradall

    I have operated a Gradall for many years. They are excellent machines. Very versatile machines. One must be careful when transporting them, very bouncy. Telescooper
  16. T

    top paving days

    Hi all, One day we laid 3500tns of binder. The plant owner came out the next day to see the job. He was pleased and told us the plant was operating at close to its maximum out put. We generally averaged around 2500tns. Telescooper
  17. T

    Asphault releasing solvent, dump trucks

    For an approved release agent or solvent try orange solvent. Orange solvent works almost as good as diesel. Buy it by the gallon then you can dilute it if necessary. We use orange solvent on the paver instead of diesel. Powdered laundry soap will work for a release agent on the bottom of the...
  18. T

    Pushing Dirt/Rocks Sideways with a CAT345

    Hi all I think if you are just sweeping material sideways, the machine will let you know how much is to much. The swing motor is not generally over powered. I think if you want to do that on a continued basis, you should be loading your bucket while pulling it towards you and swinging a little...
  19. T

    a qball rant.

    Hi all Any dump truck drivers out there, are you drivers afraid to jump in and defend yourselves:). Remember without trucks America stops:usa Telescooper
  20. T

    a qball rant.

    Ronnie You are right not all drivers are idiots, and not all foreman are *** ******* weasels. Telscooper
Top