• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Towbarman

  1. T

    Not Starting

    Towbarman here. I have a 2010 M1120A4 (PLS), Palletize Load System. It had issues with 2 injectors. Put the new ones in and still had the issue of engine light on. I checked the wiring going to the injectors and no power to them. Changed out all wiring harness's, Speed sensor and crank sensor...
  2. T

    Fuel line

    Delmer Thanks for the quick response. The fuel line comes from the injector pump straight to the engine. I have talked to my supervisor about the idea of cutting the tubing and making our own. I will also check out the websites you has mention here.
  3. T

    Fuel line

    Trying to find a parts TM for a ATLAS II Forklift. Engine serial is PE4045L23572.It's a John Deere engine. Fuel line leaking due to a crack. Any help would be appreciated.
  4. T

    Flashing lights

    My mechanic told me more on the problem. Left blinker on all lights are going, clearance and turn signal lights. Turn right turn signal on no problem with lights flashing
  5. T

    Flashing lights

    Good noonish time My issue is, I have a M1120A4 Light Hauling System (LHS). The issue is that the clearance and turn signal lights are flashing when the Hazard switch is on. I have already changed out the wiring on the steering wheel. That's where I thought the issue was. Nope. it's something...
  6. T

    M984A4 Outrigger not retracting

    I have a M984A4 Wrecker. The driver side outrigger does not retract in or out. Changed out valve body and the block that the valves sit on to receive hydraulic fluid. The outrigger control valve on the passenger side does work the outrigger jack. I do hear and feel resistance when I push up and...
  7. T

    CAT C7 engine

    I have a Cat C7 engine that won't start. It turns over but nothing. Getting fuel up to the fuel filter and water separator, but nothing after that. I'm thinking it may be the injector pump, but would like 2 second opinion. Thanks
  8. T

    Transmission code

    I can say that the machine was built for the military since it has a military Technical Manual (TM) for service, troubleshooting and for Parts. Also, as I dig into this equipment, there's several spots that the squirrels have eaten through the wire cover and into the wire itself. There's is no...
  9. T

    Transmission code

    I found a serial # yesterday. RMY1-UP
  10. T

    Transmission code

    Mr Nige Here is a few Diagnostic Codes from the Grader Monitor. SRC Code ACT 27 127-3 A 27 E284(3) A 82 41-4 A 82 2252-3 A 82 E192(3) A 82 2252-3 A
  11. T

    Transmission code

    I had to find out how to use the little box that has all the diagnostic codes, active and events. I will get information you sent me rolling after our lunch.
  12. T

    Transmission code

    Mr Nige Thanks for getting back with me so soon. As for a service manual, I do have the military version. I missed printed about the transmission codes as E192(3). I believe that code as you said was for the steering system. I had plans on plugging our MSD device to the Grader, but the shop...
  13. T

    Transmission code

    I travel to a shop to help with their equipment for training. I'm here for 2 weeks. They through me a work order on a 120M road grader with several trouble shooting task . From low hydraulic pressure, Steering system calibration and transmission code E-192(3). I looked the equipment over and...
See more
Top