• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Ricklh1

  1. R

    Td15c

    I ordered the kind which take the screw in zerks. Zerks are much cheaper than those check valves. The tract tensioning has not given me any trouble and I hope I don’t have any trouble with the tensioner, no signs of that but who knows. This old Tractor has saved me from having to do some hard...
  2. R

    Td15c

    Only one zerk/check is the kind that I can replace the zerk only. The other 3 are the kind that has the zerk made onto the check and they are broke off and beat up.
  3. R

    Td15c

    Attached is a picture of the checks without the zerks.
  4. R

    Td15c

    Looks like I have grease zerks and check valves in all 4 holes.
  5. R

    Td15c

    Got all 4 zerk/check fittings out. Soaked them in deep creep from r an hour. Ordering four new ones.
  6. R

    Td15c

    That second one is being a pain to remove, any suggestions.
  7. R

    Td15c

    I removed one zerk and check on the left track and cleaned the mud from around the other. Letting it soak for a while
  8. R

    Td15c

    I am working on the tract adjusters on a 77 td15c. Do these tractors have two grease zerks per adjuster. I am uploading a picture of both tracks. You can see in the left track adjuster there is two zerks. On the right hand track there is one zerk and a nut where another zerk could have...
  9. R

    1976 td15c tract tensioning

    Thanks for the info.
  10. R

    1976 td15c tract tensioning

    i found the tensioning zerks for the track tensioning. Do I use grease in these adjusters? With the chain slack between the front chain idler and the 1st track idler if I shoot grease in will the track tighten? Any tricks to this? I believe I might have one zerk dinged because I'm having a...
  11. R

    Td15c

    You are right. It is a pressure gauge for the winch. I followed the hose back and it terminated at the winch valve box. Another question, if I disassemble the machine far enough to replace the steering clutchs and brakes, are there any other issues I should deal with while I'm in it, seals exex?
  12. R

    Td15c

    This is a picture of the fuel gauge.
  13. R

    Td15c

    Another question concerning the fuel tank gauge on this tractor. It has a fuel gauge mounted mounted the front right side of the fuel tank, beside the hydraulic tank. It is hard plumbed from the bottom of the fuel tank. I cannot find a part # in the parts book. The book shows a dip stick...
  14. R

    Td15c

    i have purchased a td15c. I read somewhere to look on the rear right side of tractor to find the last 4 of the serial number. I found the number 1994 stamped in the frame. I believe that makes the machine a 1975 or 1976????. I want to order all of the clutch and brake disk and plates for...
See more
Top