• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Brianr3989

  1. B

    I have a Doosan P185 that cranks but can't start

    I get black smoke out of the exhaust when cranking
  2. B

    I have a Doosan P185 that cranks but can't start

    I have check fuel replace fuel filters and the housing. check all fuses. Also I but in a inline fuel pump to see and still the same.
  3. B

    I have a Doosan P185 that cranks but can't start

    It was running then stop and they tried to restart it till the battery's died. Then parked it in the yard. so i couldn't get any codes or anything
  4. B

    I have a Doosan P185 that cranks but can't start

    PE4024R075067
  5. B

    I have a Doosan P185 that cranks but can't start

    It shows power and working. Replaced it also
  6. B

    I have a Doosan P185 that cranks but can't start

    I have P185 with a JD motor it cranks and tries to start but can't. I have checked fuel shut off and replace fuel pump. I checked all fuses and all good. Can anyone help me find out what else to check?
  7. B

    2013 Cat 246c skid can't lift bucket when loaded

    it struggles to lift it higher. i will check the boom lowering knob today.I will test the other things today
  8. B

    2013 Cat 246c skid can't lift bucket when loaded

    I have a 246C skid that when using skid unloaded it works fine. If you load the bucket to dump it goes only half way up. Any help would be great.
  9. B

    615C Not build air past 60 PSI

    The brakes won't release at all
  10. B

    615C Not build air past 60 PSI

    I will see if there is a place to run a tee
  11. B

    615C Not build air past 60 PSI

    I don't hear any leaks
  12. B

    615C Not build air past 60 PSI

    the S/N 9XG00948.
  13. B

    615C Not build air past 60 PSI

    I can't get this machine to build air past 60 PSI. i have a new compressor and governor. Replace a valve that was leakingbut i can't find anything else that's leaking. Any help would be great at this point.
  14. B

    Cat 248 Skid no movement

    Well i found the problem it was the coupler between the engine and the pump? The fan did work fine but is ran by another pump.
  15. B

    Cat 248 Skid no movement

    Still working on this problem don't what to buy a pump it its not the problem. This machine has a pump on the motor that goes to the fan motor.
See more
Top