• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Zx200LC auxiliary control

ilovetracks

Well-Known Member
Joined
Jun 21, 2017
Messages
80
Location
northeast GA
Hitachi 2007 model. Dealer was no help. My machine has auxiliary lines on boom which makes me believe the valve is there but no control in cab. If the valve is there how do you control it? Electric over hydraulic? And does anyone know the gpm to auxiliary circuit? Thanks!
 

uffex

Senior Member
Joined
Jan 23, 2012
Messages
4,464
Location
Lincoln UK
Occupation
Admin
Good day
You have unlimited options, you could buy the standard pedal hook the lines top and bottom of the main valve or with solenoid valves control via a button or switch. If you follow those lines back from the boom one line at least will connect to the main valve at the MCV, the other could connect to tank for a one way hammer set up. If you post a photo of the lines we can help out some more (see 152).
Kind regards
Uffexupload_2022-4-17_9-29-46.png
 

mg2361

Senior Member
Joined
Jul 5, 2016
Messages
5,057
Location
Pennsylvania
Occupation
Equipment Mechanic
is this a dash 3 machine? If so.....

If the valve is there how do you control it? Electric over hydraulic?

It was a dealer installed option. So, you would have to add the controls. It could be either electric over hydraulic or all hydraulic. While 2 of the kits shown below are no longer available, you could piece meal them. Or, contact someone like HCT https://www.hctkits.com/excavator-kits/ or HKX http://www.hkx.com/ to see what they offer.

1 way.png 2 way.png Hyd.png
 
Top