1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

zoom boom 8044

Discussion in 'Forklifts/Telehandlers' started by Alberta Blue, Dec 21, 2019.

  1. Alberta Blue

    Alberta Blue New Member

    Joined:
    Dec 21, 2019
    Messages:
    3
    Location:
    Alberta,Canada
    When the machine is cold it wont go in reverse. Once warmed up its fine and will engage normally. Forward is not a problem...thanks for looking
    Ron
     
  2. tool_king

    tool_king Senior Member

    Joined:
    Mar 29, 2010
    Messages:
    1,493
    Occupation:
    road mechanic owner
    Location:
    new jersey
    What are trans pressure when cold and when hot ? What is your email address so I can send you the service manual with specs if you don't already have the manual for it . The trans model is T12000 in your
    machine .
     
    Last edited: Dec 22, 2019
  3. Alberta Blue

    Alberta Blue New Member

    Joined:
    Dec 21, 2019
    Messages:
    3
    Location:
    Alberta,Canada
    i havent checked the pressures. The problem happens when the weather is cold. In the summer it is not an issue. I don't know if this needed to be clarified? My email is rchetney@telus.net Merry Christmas Ron
     
  4. Bls repair

    Bls repair Senior Member

    Joined:
    Jan 21, 2017
    Messages:
    1,172
    Occupation:
    Equipment operator,mechanic
    Location:
    S E Pa
    I’ve had this happen many times on a lot of different types of equipment . That’s they recommend warming up equipment in cold weather.
     
  5. Alberta Blue

    Alberta Blue New Member

    Joined:
    Dec 21, 2019
    Messages:
    3
    Location:
    Alberta,Canada
    Thanks, yep it would be better if we could keep it in a heated shop...