1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

wirtgen w150 travel control

Discussion in 'Mills' started by bkindya, Dec 9, 2012.

  1. bkindya

    bkindya New Member

    Joined:
    Dec 9, 2012
    Messages:
    1
    Location:
    pennsylvania
    Has anyone ever successfully disabled the safety travel control that slows the machine down when the rear tracks are turned past a certain point, i'm trying to find any information on how to disable this meaningless feature, i know on the w2000 and w2100 its just a wire that needs cut but i can't seem to finde any information for the w150, if anyone can help me out i would greatly appreciate it